How To Change MAC Address On Windows 10

If you want to change the MAC address of your Windows 10 device, it’s easy to do. Just follow these steps:

1. Go to Start and type in “cmd.”

2. Right-click on Command Prompt and select “Run as administrator.”

3. Type in “ipconfig /all” and press Enter.

4. Find your network adapter and note down the Physical Address.

5. Type in “getmac” and press Enter.

6. Find your network adapter and note down the MAC address.

7. Type in “setmac /add:” and press Enter.

8. Enter the new MAC address you want to use.

9. Reboot your computer.

That’s it! You’ve successfully changed your MAC address on Windows 10.

Why Change a Mac Address on Windows 10?

There are a number of reasons you might want to change your MAC address on Windows 10. Perhaps you’re troubleshooting a network issue and need to rule out your hardware as the source of the problem. Maybe you’re trying to avoid being tracked online, or you’re trying to access a network that has MAC address filtering in place.

Whatever your reasons, it’s fairly easy to change your MAC address on Windows 10. Here’s how.

Change Mac Address on Windows on 10 using Third-Party Software

If you want to change your MAC address on Windows 10, you can do so using third-party software. There are a few different programs that can help you do this, but we recommend using a program called Technitium MAC Address Changer.

READ  How to Find All the Pictures on Your Windows Device?

Once you’ve downloaded and installed Technitium MAC Address Changer, open the program and click on the “Advanced Options” button.

In the Advanced Options window, select the “Network Adapters” tab.

Select the network adapter that you want to change the MAC address for, and click on the “Change MAC Address” button.

Enter the new MAC address that you want to use, and click on the “OK” button.

Click on the “Apply” button, and then reboot your computer.

Your new MAC address will now be applied to the selected network adapter.

How to Change a Mac Address on Windows 10?

There are a number of ways that you can change your MAC address on Windows 10, depending on your needs. You may need to do this if you’re trying to connect to a secure network that requires MAC address filtering, or if you’re trying to troubleshoot network issues.

To change your MAC address on Windows 10, you can use the built-in utility called the Command Prompt. To do this, open the Command Prompt by pressing the Windows key + R, then type “cmd” and press Enter. In the Command Prompt, type the following command and press Enter:

ipconfig /all

This will display all of your network adapters and their corresponding MAC addresses. To change your MAC address, you will need to type the following command, replacing “xx” with the new MAC address that you want to use:

netsh interface ipv4 set address name=”Local Area Connection” source=static addr=192.168.0.1 mask=255.255.255.0 gateway=192.168.0.254 gwmetric=0

You will need to be connected to the Internet for this command to work. After you have entered the command, your MAC address will be changed and you will be able to connect to the network that you were previously having trouble with.

READ  Top 12 Best Solo Traveler Apps That You Must Know

How to Confirm if Mac Address is Changed

If you want to check and see if the MAC address has been changed, there are a few ways to do this. One way is to use the ipconfig /all command. This will show you the network adapters that are installed on the computer, and the MAC address for each one. Another way to check is to use the getmac command. This will show you the MAC addresses for all of the network adapters that are currently enabled.

How To Change MAC Address On Windows 10

Conclusion

1.To change your MAC address on Windows 10, you’ll need to find your device’s network adapter and then open its Properties window.

2.In the Properties window, go to the Advanced tab and then click the “Network Address” button.

3.In the “Network Address” dialog box, enter a new MAC address in the “Value” field. Be sure to use a valid MAC address format.

4.Click “OK” to save the changes and then close the Properties window.

5.Reboot your computer for the changes to take effect.
Thanks for reading my post on How To Change MAC Address On Windows 10. I hope you found it helpful. If you have any questions or comments, please feel free to leave them below. I’ll be happy to answer them.

Leave a Comment