How To Fix Winload.Efi Missing After Clone

If you’re getting the Winload.Efi missing error after cloning your hard drive, don’t worry. There’s an easy fix. Just follow the steps below and you’ll be up and running in no time.

How to fix the “Winloadefi missing or contains error” issue in Windows 10

If you’ve been seeing the “Winloadefi missing or contains error” message in Windows 10, don’t worry – there are a few easy fixes. First, try running the built-in Windows 10 Startup Repair tool. If that doesn’t work, you can try manually repairing the Boot Configuration Data (BCD). And if all else fails, you can always reinstall Windows 10.

Reasons behind the error –

There can be several reasons behind the error “winload.efi missing”. One of the most common reasons is that the boot files are not properly configured. This can happen if you have recently installed a new operating system or if you have made changes to the boot files. Another possible reason is that the boot files are corrupted. This can happen if your computer is infected with a virus or if there is a problem with the hard drive.

1 Enable CSM compatibility mode –

If you’re getting the “winload.efi missing” error after cloning your hard drive, it’s likely because your new hard drive is not set up to be compatible with the older BIOS on your computer. To fix this, you’ll need to enable CSM (Compatibility Support Module) compatibility mode in your BIOS.

READ  How to Reinstall Windows 11

To do this, restart your computer and press the key to enter the BIOS setup utility (usually F2 or DEL). Then, look for a setting called “CSM compatibility” or “Legacy Boot Mode” and make sure it’s enabled. Once you’ve saved your changes and exited the BIOS, your computer should be able to boot from your new hard drive without any problems.

2 Check system drive –

If your system drive is corrupted, then you will need to replace it. To do this, you will need to use a live CD or USB drive and boot into your computer. Once you are in your computer, you will need to open the Command Prompt and type in the following commands:

DISKPART

LIST VOLUME

SELECT VOLUME (number of your system drive)

CLEAN

CREATE PARTITION PRIMARY

FORMAT FS=NTFS QUICK

ACTIVE

EXIT

Once you have done this, you will need to copy the contents of your Windows installation media to your system drive. To do this, you will need to type the following command into the Command Prompt:

XCOPY (source) (destination) /E /F /H

Once you have done this, you will need to reboot your computer and your system drive should now be working.

3 Run SFS –

If the above methods do not work, you can try running the SFS (System File Scanner) tool. This will scan your system for missing or corrupt files and attempt to repair them. To do this, simply open a command prompt (click Start and type cmd into the search box) and type sfc /scannow. This will take a while to complete, but once it is done, reboot your system and see if the problem is resolved.

READ  How To Protect Your Social Media From Hackers And Identity Theft

4 Rebuild BCD and MBR –

If the issue is with your computer’s MBR or BCD, you can rebuild them using the following steps:

1. Boot from your Windows installation media.

2. Choose the Language to install, the Time and currency format, and the Keyboard or input method options, and then click Next.

3. On the Install Windows page, click Repair your computer.

4. In the System Recovery Options dialog box, choose Command Prompt.

5. In the Command Prompt window, type the following commands, and then press Enter after each command:

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

6. Close the Command Prompt window, and then click Restart.

Frequently Asked Questions –

Q: Why is my computer not booting up after I cloned my hard drive?

A: One possible reason for this is that the Winload.efi file is missing from your hard drive. This file is necessary for Windows to boot up properly, so without it, your computer will not be able to start up. There are a few ways to fix this problem:

-First, try using a Windows installation disc or recovery drive to startup your computer. This will allow you to access the Windows Recovery Environment, where you can then use the bootrec.exe tool to rebuild the boot configuration data.

-If you don’t have a Windows installation disc or recovery drive, you can try using a third-party boot repair tool. These tools are designed to help fix common boot problems, including the missing Winload.efi file.

-Finally, if all else fails, you can try manually copying the Winload.efi file from another computer to your hard drive. This should only be attempted as a last resort, as it can be difficult to do correctly.

How To Fix Winload.Efi Missing After Clone

READ  How To Capture Screenshot And Video With The Same Tool

Conclusion

1. Use a Windows installation disc or drive

If you have a Windows installation disc or drive, you can use it to repair the missing or corrupted Winload.efi file. To do so, insert the disc or drive and boot from it. Then, follow the on-screen instructions to repair your system.

2. Use Easy Recovery Essentials

Easy Recovery Essentials is a recovery tool that can be used to repair the missing or corrupted Winload.efi file. To do so, simply download and install Easy Recovery Essentials, then launch it and follow the on-screen instructions to repair your system.

3. Use the bcdboot tool

The bcdboot tool can be used to repair the missing or corrupted Winload.efi file. To do so, simply open a command prompt and type the following commands:

bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

4. Use the Windows Recovery Environment

If you can’t boot into Windows, you can use the Windows Recovery Environment to repair the missing or corrupted Winload.efi file. To do so, simply boot from a Windows installation disc or drive, then select the “Repair your computer” option. From there, follow the on-screen instructions to repair your system.

5. Use System Restore

If you’ve created a system restore point in the past, you can use it to restore your system to a previous state. To do so, simply launch the System Restore tool from the Start menu and follow the on-screen instructions to restore your system.
Thanks for reading! I hope this guide has helped you fix the winload.efi missing after clone error. If you have any other questions or suggestions, please feel free to leave a comment below.

Leave a Comment